Kverneland PW - RW (hidden)
Easy to operate wagon plough: "3 ploughs in 1" with 7-12 furrows
Highlights
Easy and safe to adjust and to operate In-Furrow and/or On-Land Stable while turning and in transport Use either front or rear ploughs or together Re-consolidation: Packomat availableDescription
Efficient, flexible, easy to operate
The well proven Kverneland PW/RW “3 in 1 concept" consists of a robust semi-mounted plough in the front and a standard EG or LB mounted reversible plough at the rear.
Depending on weather and soil conditions, either use the whole wagon plough or only the front or the rear plough. Likewise if 2 fields need to be ploughed simultaneously, the front and the rear ploughs can work in each field.
The advantages:
- robust design + Kverneland unique steels and heat treatment technology for an exceptional long lasting of the plough
- even in hilly conditions a quality ploughing is guaranteed. The 3 point linkage of the center section ensures that the PW/RW follows the ground at all times.
- easy and safe to adjust and to operate (ATS, Isobus, manual management with the addition of a valve controller or manual management via tractor control)
- FURROWcontrol for easy straight furrows is available for the Isobus PW and RW ploughs versions
- unrivalled Auto-reset system for PW for non-stop ploughing. No maintenance. Shearbolt protection for RW
- Variomat Vari-width® for "On the Move" or manual furrow width adjustments
- "In Furrow" and/or "On Land"
- stable and safe while turning and in transport
- Packomat compatible
- wide range of accessories
- 7 to 12 furrows
Technical Specifications:
Models (Stepwise) |
Interbody clearance cm |
Underbeam clearance cm |
Furrow width cm |
No of furrows |
PW |
100 |
70/75 |
35 - 50 |
7 - 12 |
RW |
100 |
70/80 |
35 - 50 |
7 - 12 |
Models (Vari-width®) |
Interbody clearance cm |
Underbeam clearance cm |
Furrow width cm |
No of furrows |
PW |
100 |
70/75 |
35 - 50 |
7 - 12 |
PW |
115 |
70/75 |
35 - 50 |
7 - 10 |
RW |
100 |
70/80 |
35 - 50 |
7 - 12 |
RW |
115 |
70/80 |
35 - 50 |
7 - 10 |
Features
Importance of heat treatment
- The frame is an essential part of the plough construction. For Kverneland quality standards, a non heat treated part is a weak part!
- Kverneland frames are heat treated by induction twice. The temperature transfer to the steel is closely monitored. The frame gains 3 times as much strength. This unique Kverneland induction processes provides robustness and flexibility while ensuring an outstanding durability.
Stronger but not heavier
- For the equivalent Kverneland robustness, competitors would use more steel in thickness or in dimensions, therefore producing a heavier frame.
- Heavier frame impacts negatively pulling forces, wearing of parts, lifting capacities, tractor life time, and fuel consumption.
Long lasting
- Weldings are also a critical weakness for a plough frame. Kverneland frames are supplied as one sole part, no welding!
Frame availability
- 120 x 200 mm 7-9 furrows
- 200 x 200 mm 10 and12 furrows
- 200 x 250 mm 12 and 14 furrows
- The “tail” of the plough is either a 200 or a 300 head stock EG/LB plough
Stepless Vari-width® system for infinite adjustments of working width. Kverneland’s world patented system is available either with hydraulic or mechanical furrow adjustments.
Benefits:
- Easy variation of ploughing capacity
- Perfect match at all time between tractor capacity, implement and soil conditions
- Time saving: up to 30% more capacity
- Cost saving: up to 18% reduction in fuel consumption in relation with increased ploughing capacity
- Better work: plough up to the hedges, fences, trees and ditches
- Minimum wear: unique non-wearing linkage joint between the beams and the mainframe section
- Perfect line of pull at all time. Kverneland’s Vari-width offers the correct parallel linkage along the whole plough. Therefore, lower draft requirement, minimum wear and tear.
Excellent Ploughing Quality
They are renowned all over the world for their:
- excellent ploughing quality
- outstanding wear resistance
- low draft requirements
Bodies of a unique steel.
Kverneland Technology: 12 hours carburising heat treatment process for:
- optimum wear resistance (sharp as a diamond)
- the necessary flexibility to absorb impacts
Body No. 8 – “Universal body”
for light to heavy soils
good trash burial
easy pulling
Depth: 15 to 30 cm (6 to 12”)
Width: 30 to 55 cm (12 to 22”)
Body No. 9 – “Deep Universal body”
for heavier soils and deeper ploughing
well turned and packed furrows
easy pulling
Depth: 15 to 35 cm (6 to 14”)
Width: 30 to 55 cm (12 to 22”)
Body No. 28 – “Wide tyre body”
suits all soils; even heavier soils than body 8
very wide empty furrow for tractor wheels up to 710 mm
good turning and well packed
easy pulling
suitable for Depth: 12 to 30 cm ( 5 to 12”)
Width: 30 to 55 cm (12 to 22”)
Body No. 30 – “Finger body”
for sticky-stony soil and abrasive soils
good work in heavier soils
best crumbling effect
wide furrow bottom,
Depth: 20 to 35 cm (8 to 14”)
Width: 30 to 55 cm (12 to 22”)
Body No. 34 – Plastic mouldboard
Long and slim shape (similar to body 28)
For soils with high humus content without stones
Advised for tactors with large tyres
Easy pulling
Working depth: 12-35cm
Working width: 30-55cm
Landside / mouldboard: 40 degree
Body No. 38
universal body – easy to pull
for any soil conditions
recommended for tractors with large tyres
from deep to shallow ploughing
perfect turning of the furrow slice
working depth: 12-35 cm
working width: 30-55 cm
landside / mouldboard: 40°
Unbeatable in stony conditions !
Kvernelands fully automatic non-stop Auto-Reset System is unbeatable when it comes to trouble-free ploughing in stony conditions. The clever multi-leaf spring system allows the plough legs to release over stones and other solid objects in a smooth and efficient manner. This avoids sudden jolts and possible damage. Once the obstruction is passed, the plough body automatically returns to the correct ploughing depth.
Safety compliance
With today's demands for higher output, both tractor and plough are expected to perform quicker than ever. This makes more arduous demands on the equipment, particularly on the safety systems designed to protect tractors, ploughs and drivers against the dangers encountered whenever the plough meets hidden obstructions in the ground. The Kverneland Auto-Reset system guaranties this safety high standars requirements.
Adaptable to varying soil conditions
Depending of the type of soil all Kverneland ploughs can be equipped with different leaf springs packages. For soft soils, a normal spring with 5 leaves is the best choice to obtain the perfect ploughing in stony conditions. Today, most Kverneland ploughs are delivered with the Heavy Duty springs package (HD) with 7 leaves. This will perform well in most conditions. If the soil is very hard and stony - a double leaf spring package is recommended.
Extra leaves when needed
The standard Auto-Reset system includes 7 Kverneland heat treated springs (640Kp).
For heavier to extreme soil conditions, extra leaf springs are added for up to 1400kp.
The leaves are easily fixed with one central bolt only.
Individual body release !
The Kverneland mechanical Auto-Reset system enables very plough body to release independently. A quality ploughing is therefore guaranteed.
Minimum wear and high second hand value
Kverneland's Auto-Reset System is a quite simple construction that withstands the punishing forces year in, year out, with a minimum of maintenance. Save time and money !
Moreover, the Kverneland auto-reset system guarantees a longer life to the plough. When hitting an obstacle, the pressure on the point, frame, plough parts, decreases. The stress on Kverneland ploughs is therefore reduced. Consequently, second hand Kverneland ploughs sell at a higher value than competitors ploughs.
*by using an Hydraulic system, pressure would increase
Kverneland Heat Treatment Technology:
- more than 140 years of experience
- steels that withstand the toughest of conditions
- best robustness/weight ratio on the market
- for equivalent robustness, competitors would add more steel and therefore more weight, quicker wear, dissappointing ploughing results
Kverneland Steels:
- Benefits from less weight:
easier to pull/lower fuel consumption/lower lift requirement/reduced wear and stress for the tractor/more economical … - Benefits from more resistance:
minimum breakage/less maintenance/lower rotation for wearing parts/time saving/highest 2nd hand plough value/longer life for the plough/more economical…
Problems always happen when the plough is being used, when the work must be done!
A Kverneland plough is a peace mind!
More info: Kverneland Technology