The Kverneland XHD+ Carbide range consists of parts that have been reinforced with larger amounts of tungsten carbide compared to the standard XHD Carbide parts. This dramatically increases the lifetime of the parts, up to 20 times the life* of the standard parts, double the life of the standard XHD parts.

Choosing between XHD and XHD+ is a question about balance between performance and cost. XHD+ Carbide will typically be the right choice for contractors who operate large areas and are sensitive to downtime.

_{*Based on average test conditions. Depending on soil type, moisture content, machine type, working speed, working depth, machine width and mounting position.}

Kverneland’s XHD plough parts are designed with the most extreme conditions in mind. Abrasive soils put significant stresses on earth wearing parts, resulting in fast wear and regular parts replacement. Thus increasing both costs and downtime. 

The Kverneland XHD Carbide range is the ideal solution that makes light of tough and demanding conditions. Each part is reinforced by embedding specially shaped tungsten carbide tiles on strategic places that are exposed to hard wearing. Especially suited to large farms and contractors, the new XHD range has a lifetime up to 10 times the life* of the standard parts, keeping costs and downtime to a minimum. A cost effective alternative to handle the toughest conditions.

*Based on average test conditions. Depending on soil type, moisture content, machine type, working speed, working depth, machine width and mounting position. 

Tungsten Carbide is one of the hardest materials known to man. Combining Carburised Tungsten Powder with Soft Cobalt produces a long lasting, hard and durable material able to withstand extreme impacts.

A Premium Grade of Tungsten Carbide tiles are applied to Kverneland XHD parts to protect key areas against breakage and fast wearing.

The function of each XHD part is different and as such, each experiences different stress levels and impacts. To achieve an acceptable balance between long life verses cost, whilst retaining its high wear characteristics and resistance to impacts - each part has a unique balance between hardness and flexibility.

Many reinforced Non Genuine parts are not heat treated, but rely solely on the Tungsten Carbide protected areas. In Kverneland, we understand the importance of balancing the correct heat and hardness and apply the same tried and proved methods to all our XHD parts.

To allow a frictionless flow of soil, our unique heat treatment produces a harder and smoother surface that lasts longer than softer, untreated steel. The ideal combination of Tungsten Carbide tiles on heat-treated steel gives you the best weapon to face the most extreme soil conditions.  

The traditional method of reinforcing steel parts is to apply flat tungsten carbide tiles to the surface of the cutting edge. However, these only protect the surface - not the cutting edge.

All cutting edges of the Kverneland XHD range are equipped with Corner Tiles. These specially designed tiles wrap around the leading edge, protecting both the surface and edge from wear and damage. The result is a sharper, long lasting edge – that remains resistant to shocks and breakages from hard impacts.  

1. Additional protection to steel body 
2. Extremely shock resistant 
3. Avoids wearing the steel point 

The XHD Carbide point is protected with 5 premium grade tungsten carbide tiles. 3 specially designed corner tiles are located along the leading edge and retain their specific shape and strength to give maximum protection against hard impacts and abrasive soils. In addition, 2 tiles have been placed on the upper side of the point to protect the zone particularly exposed to wear. At last, but not least, the XHD Carbide point has a special shape to ensure a very good soil penetration, even in the driest and hardest soil conditions. The XHD Carbide point will fit on the XHD Carbide share but also any other
Original Kverneland share which accepts standard Kverneland reversible point.

XHD CARBIDE POINT*

A152081130 - Left, bolts included
A152081030 - Right, bolts included

_{*XHD Cabide points fits body no. 8, 9, 25, 28, 38. Will fit on Standard reversible shares and CLC/CTC stubble cultivators.}

The XHD Carbide shares are protected with 17 (16” share) and 20 (18” share) premium grade tungsten carbide corner tiles. Located along the full leading edge of the share, the tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils. The shares are designed to be a seamless link between the point and mouldboard and ensure a smooth flow of soil over the whole plough body with minimum friction, resulting in longer lifetime.

XHD CARBIDE 16” SHARE*

A152081730 - Left, bolts included
A152081630 - Right, bolts included

XHD CARBIDE 18” SHARE*

A152081930 - Left, bolts included
A152081830 - Right, bolts included

_{*XHD Cabide shares fits body no. 8, 9, 25, 28, 38}

The XHD Carbide landside is protected with 8 (short landside) and 10 (long landside) premium grade tungsten carbide tiles, that retain their shape and strength to give maximum protection against hard impacts and abrasive soils. Divided into 5 (short landside) and 7 (long landside) evenly spaced columns, all tiles are countersunk and specially angled to give the landside maximum protection against the most abrasive conditions.

XHD CARBIDE LANDSIDE SHORT
A152001586 - Left
A152001486 - Right

XHD CARBIDE LANDSIDE LONG
A152001786 - Left
A152001686 - Right

The XHD Carbide skimmer share is protected with both tungsten carbide tiles and PTA (plasma transferred arc) hard facing. Located on the horizontal cutting edge, the 11 specially designed premium grade tungsten carbide corner tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils. In addition, a strip of PTA to the vertical edge gives added protection against aggressive conditions.

XHD CARBIDE SKIMMER SHARE
A133949530 - Left, bolts included
A133949430 - Right, bolts included

The XHD Carbide shin piece is protected with 11 premium grade tungsten carbide corner tiles that retain their shape and strength to give maximum protection against hard impacts and abrasive soils. Located on vertical leading edge the tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils, whilst ensuring an even flow of soil and protection to the base of the mouldboard.

XHD CARBIDE SHIN PIECE*
A133939530 - Left, bolts included
A133939430 - Right, bolts included

_{*XHD Cabide shin piece fits body 8 and 28.}