Power Harrow - Get ready for next season
Helpful tips and tricks to get your Power Harrow prepared to operate at it’s maximum capacity through the season.
YOUR PARTS SPECIALIST
Find your local Kverneland dealer
Only Original Parts will keep your machine a Kverneland
Be prepared for the coming season; Contact your local Kverneland dealer to arrange a pre-season service or health check on your Kverneland Power Harrow. Ensure that you have sufficient stocks of essential wearing parts. Keep down time to a minimum and take advantage of the Special Out of Season prices on Original Parts.
Ensure all roller scrapers are correctly adjusted. Replace if worn.
Check the working depth of the rear roller. Adjust if necessary.
To avoid ridging ensure side shields are set at the correct height. Replace if worn.
Check condition and length of all tines. Replace if necessary.
Check oil levels in main gearbox and trough.Top up if necessary.
TINES: CUSTOMISE YOUR POWER HARROW
Standard Tines
Very hard with milled cutting edges results in long lifetime and reduced
wearing costs.
BOLTED TINE
Available versions: R.H/L.H, 12mm
QUICK FIT TINE
Available versions: R.H/L.H, 12mm, 15mm, 18mm
Quick Fit system - for easy change to reduce downtime.
Pro-Fit Active Tines
Perfect penetration in hard soils. Constant working depth resulting in an even and level surface. The unique shape of the tines ensure plant residues remain on the surface thus keeping soil erosion to a minimum.
QUICK FIT TINE
Positive angle.
Available versions: R.H/L.H 15 mm, 18 mm
Carbide Coated Tines
Ideal for hard and heavy working conditions. The specially coated tines retain their sharp cutting edges and can last up to 4 times longer than standard tines, thus reducing downtime and fuel consumption.
CARBIDE COATED TINE
Available versions:
R.H/L.H 12mm, 15mm, screwed
QUICK FIT CARBIDE COATED TINE
Quick Fit system - for easy change to reduce downtime.
Available versions:
R.H/L.H 15mm,18mm
R.H/L.H 15mm,18mm, Positive angle.
Winter Coating
Give the very best care to your Power Harrow during winter storage.
Kverneland Group Winter Wax Coating removes all plant residue and protects all metal parts from rust and corrosion. Winter Protection ensures that your Power Harrow remains in top working condition.
WINTER COATING
Content: 1 litre
Article number: A138672101
Scrapers for Packer Rollers
STANDARD SCRAPER
Scraper for Standard packer roller.
Size: 500, 585, 600 mm
Article number: RF23748
CARBIDE SCRAPER
Scraper cw carbide coating for standard packer roller.
Size: 500, 585, 600 mm
Article number: RF23749
CARBIDE SCRAPER
Scraper cw carbide coating
for Flexline roller.
Article number: A137097894
NYLON SCRAPER
Nylon scraper for disc roller/cracker packer.
Article number: MA8000077
HOLDER
Blade/scraper holder for disc roller/cracker packer.
Article number: A137230897
SKID
Skid with screws for Actipack
roller
Article number: RF30657X0
DISTRIBUTION CENTRE METZ - SERVICE 24/7
Time is money, and we know the importance of receiving the right parts at the right time! Your Kverneland dealer is supported by a massive distribution network to supply you with exactly what you need, when you need it.
Our main distribution centre Metz warehouse is located in Thionville, France. A strategic location for distributing parts to all corners of the world. With over 70.000 parts in stock and 24/7 service, we are ready to supply you with parts – at any time!
