The CLC pro in its Cut variant is available in 3.0 and 3.5m working width as rigid model.
The frame design is the same as the “Classic” model with the rear equipment based on roller arms holding a bar of levelling tines in front of the roller. Other equipment from the CLC pro is also available like the combidisc harrow or the double disc gang for intensive incorporation.
Max power for the 3,00m is 240hp.
The full roller program is available for this Cut version.
The front cutting disc can be hydraulically adjusted from the cab at any time. This means that the pressure on the discs is also defined by the cylinder position.
The working depth is often around 5 cm to be able to cut the material and the roots if necessary. Each disc is independently protected by 4 rubber shock absorbers.
The bearings are maintenance free.
Zone 1 - cutting
Equipped with one row of front cutting discs, the CLC pro Cut is the ideal machine for working with long residue conditions like sunflower, maize, etc…
Zone 2 - cultivating
The front cutting discs are followed by 2 rows of tines with wide tine spacing (approx. 400mm) for managing the residues. The wider share, Quantum 345mm, is used. The tines can have Knock-On deflectors for nice stubble incorporation.
Zone 3 - levelling
The rear equipment on the CLC pro Cut reduces the required lifting capacity. The machine can then be equipped with the levelling tines and the short roller arms. The machine is then compact enough to be used with a lighter tractor. Other equipment like Combi-disc or double discs can also be used.
Zone 4 consolidation
Very active rollers provide a nice recompaction and close contact soil / residues.
|Models||CLC pro Cut 300||CLC pro Cut 350|
|N° of tines||7||9|
|N° of cutting discs||10||12|
|Working/transport width (m)||3.00/3.00||3.50/3.50|
|Weight: Shearbolt, levelling tines, Actiring||1807 kg||2055 kg|
Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm
The CLC pro Cut can be equipped with a wide range of rear implements.
Combi disc harrow:
Double disc gang ø 510 mm:
Cage roller ø 550mm - 90 kg/m
Double cage roller ø 400mm (tube/flat) - 160 kg/m
Actipress Twin ø 565mm - 220kg/m without soil
Actipack ø 560mm - 220 kg/m
Actiring ø 540mm - 160 kg/m
Actiflex roller ø580mm - 160 kg/m