The new Kverneland foldable power harrow NG-H 101 F30 with working widths from 4.0 to 6.0m completes the product range of Kverneland power harrows. Designed to meet the needs of large-scale harrowing, the new Kverneland F30 offers all features developed in over 40 years experiences with PTO driven equipment.
The Kverneland F30 is based on an innovative trough design that does not require any lateral frame. This saves weight and gives the machine a clear design. The new Kverneland F30 works with 4 rotors per metre of trough. Optimum tillage performance and low power consumption is achieved by the closer inter-tine carrier distances (25cm). In addition the helical tines configuration combined with 95mm of rotor clearance allow perfect soil levelling and preparation.
|Model||Working-/Transport width (m)||No. of rotors||Weight with packer roller (kg)|
|NG-H 101 F30 4.00m||4.00/2.50||16||2560|
|NG-H 101 F30 4.50m||4.50/2.50||18||2790|
|NG-H 101 F30 5.00m||5.00/2.50||20||3140|
|NG-H 101 F30 6.00m||6.00/2.50||24||3450|
The innovative trough design without any lateral frame
Clear design saving weight
High clearance of 95mm between the tine holder and trough bottom
Double conical bearings and rotor shaft of 50mm diameter in combination with removable tine holders and Quick-Fit tines guarantee high reliability and very low maintenance requirements
Helical tine positioning in order to prevent damage caused by stones and to ensure even levelling. This reduces also peak loads on the driveline and results in smoother running and less fuel consumption.
The quick-fit tines for easy replacement and carbide tines for a longer lifetime and minimum wearing are available as an option.
The Kverneland range of rollers offers the right choice for all various soil conditions and crop establishment systems.