Kverneland CTC Cultivator

The tasks of modern soil preparation are multifunctional. Additionally farmers have to meet their specific needs which are predetermined by location and farming practices.

The equipment possibilities of the Kverneland CTC are as versatile as your demands, with a choice of different implement combinations and variants Kverneland offer the possibility to equip the CTC to meet your individual needs.

The Kverneland CTC offers total flexibility with:

  • 3 tine spacings
  • 2 tine variants
  • 8 types of shares
  • 2 types of front cutting discs
  • 4 types of levelling devices
  • 3 types of rear roller

The CTC can be equipped with 3 rows of tines positioned at either 270mm or 330mm spacing.

When fitted with four rows of tines the tine distance is 200mm.

Model No. of tines No. of rows Min./Max. HP
CTC 400 / 13'1" (4.0m) 11 (spacing 330mm) / 12'1" (3.7m)
15 (spacing 270mm) / 13'1" (4.0m)
19 (spacing 200 mm) / 12'5" (3.8m)
3 (spacing 270 or 330mm)
or 4 (spacing 200mm)
145 / 280
CTC 500 / 16'4" (5.0m) 15 (spacing 330mm) / 16'4" (5.0m)
17 (spacing 270mm) / 15'1" (4.6m)
23 (spacing 200mm) / 15'1" (4.6m)
3 (spacing 270 or 330mm)
or 4 (spacing 200mm)
175 / 320
CTC 600 / 19'7" (6.0m) 17 (spacing 330mm) / 18'7" (5.7m)
21 (spacing 270mm) / 18'7" (5.7m)
29 (spacing 200mm) / 19' (5.8m)
3 (spacing 270 or 330mm)
or 4 (spacing 200mm)
205 / 360
KV_ctc_0002.jpg
Video
Animation
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator
Kverneland CTC Cultivator


CTC - Frame

  • The CTC can be equipped with 3 rows of tines with 270mm spacing ensuring optimum mixing and intensive cultivation.
  • A maximum working depth of 30cm is possible
  • The wing shares, when fitted, ensure that the entire working width of the machine is cultivated even when the machine is adjusted for shallow work.
  • The high inter-row clearance up to a maximum of 150cm and the underbeam clearance of 87cm ensure blockage-free operation under any conditions.
  • The outer wings are pre-loaded by hydraulic accumulators and can be adjusted to suit the various field conditions
KV_ctc_0008

CTC - Tines and Shares

  • The unique and robust design of the tines incorporates a special, heat treated hollow “C” profile.
  • The heat treatment is of the same standards as the beams on the Kverneland ploughs.
  • For lighter conditions, Kverneland offer the "C" tine with shearbolt overload protection releasing from 2 tons.
  • The Kverneland "C" tine equipped with the "Auto-reset" leaf spring safety system is the perfect choice for hard and stony conditions.
  • The auto-reset tine leg can withstand sideway movements of up to 20cm. This means lower stress to the tine holder and frame structure.

Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm.

  • The "C"-tine: with the standard reversible plough point made of high quality steel for maximum service life. This allows the CTC to work at great depths even in stony soil - eliminating plough pans and in this way encouraging natural drainage.
  • For stubble cultivation the "C" tine can be equipped with 30cm wing shares.
  • New Quantum share 345mm - always in combination with Knock-on® or Tiger carbide point 80mm. It has been designed for use especially in hard soil. The 80mm point combined with the 345mm wing share ensures perfect penetration and complete flat cutting for a homogeneous weed regrowth.
  • Two types of carbide points – 80mm and 150mm Tiger point. The special design ensures progressive and high penetration and requires low pulling force. The special shape of the carbide plate resist against aggressive stony conditions. All points available with Knock-on® deflectors too
  • The "C"-tine system is maintenance-free.
  • Click here for further details on the Knock-on® system. 
KV_tine technology_0008.jpg
Heat treatment of tines
Heat treatment of tines
Heat treatment of tines
Plough point with wings
Plough point with wings
Plough point with wings
CTC - Tines and Shares
CTC - Tines and Shares
Knock-on 80
Knock-on 80
Knock-on 80

CTC leaf spring / Vibromat

  • For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
  • This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
  • The well renowned Kverneland leaf spring protects the tines against overload.
  • The release pressure can be adjusted if required.
  • All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
  • Therefore the CLC tine system is maintenance-free
KV_ctc_0029.jpg
CTC leaf spring / Vibromat
CTC leaf spring / Vibromat

CLC Evo - Rear Accessories

There is a full range of levelling equipment and rear rollers available:

Combi disc harrow 

  • Combination of a single disc gang with all roller type

Double disc gang diameter 510 mm 

  • Leaves a rough surface with aggregates ready for wintering, interesting at the end of autumn season for preparing spring fields and crops

Cage roller ø 550mm - 90 kg/m

  • 10 bars for a good loading  capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precise depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils and also in wet, stony and sticky conditions thanks to the independent skids and knives.
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breakdown and fine seedbed preparation.

Actiring ø540mm - 160kg/m

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system.
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment.
  • Actiring is not recommended in stony conditions

Actiflex roller ø580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing under all types of conditions, even stony ones
  • The rings are made of spring steel to have a high resistance against stress at high speed
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting.
KV_rear roller_0005.jpg
Combidisc roller
Combidisc roller
Combidisc roller
Actipack
Actipack
Actipack
Double disc gang
Double disc gang
Double disc gang