Kverneland 5087 M

Butterfly Disc Mower

Kverneland 5087 M is the perfect machine for the ever growing number of cattle farmers looking for an effective solution enabling them to mow extensive areas with a relatively small tractor. Designed to match the needs of large-scale mowing, the new 5087 M is packed with features to meet these demands. The centre suspended mowing units, in combination with the round discs, offer unmatched mowing performance.

The Advantages:

  • Centre Suspension
  • 28'7" (8.75m) Working Width
  • Non-Stop Break-Away
  • Vertical Transport Position

Technical Specifications:

  Working Width No of Discs Weight Power Requirements
5087 M 28'7" (8.75m) 16 (2x8) 3528 lbs (1600kg) 81/110 kW/hp
KV 5087 M 0004.jpg
Video
Animation
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M
Kverneland 5087 M


Cutterbar with Round Discs

  • Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
KvT_2600_0013.jpg
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
ProFit quick change of knives.
ProFit quick change of knives.
ProFit quick change of knives.

Suspension

  • The mowing units are centre suspended offering an even weight distribution across the complete mower width.
  • Faster and more precise adaptation to ground contours is also achieved due to the centre suspended design.
  • The benefit is less skid wear and optimum protection of the stubble.
  • When turning on headlands the hydraulic cylinder, which is also used when going into transport position, ensures ample clearance to the swath, so they remain undamaged.
KV 5087 M 033.jpg
Easy turning on headlands
Easy turning on headlands
Easy turning on headlands
Suspension
Suspension

Two Mounting Options

  • 5087 M can be adjusted for optimal operation according to different circumstances, such as field contours or working width of the front mounted mower.
  • To ensure optimal overlap between front and rear units, the mowing units can be mounted in two positions on the suspension arm.
  • This also gives you an option of wider overlap in hilly conditions, lessening the need for SideShift equipment.
KV 5087 M 0015.jpg

Eco-Friendly Solution

  • The  Kverneland 5087 M and 5095 M are an eco-friendly, energy saving solution able to work on tractors with as little as 120 hp.
  • The low weight of only 1360-1500kg, together with the ideal weight distribution that butterfly combinations offer, give the optimum combination of low power requirements, low weight and high efficiency.
KV 5087 M 025.jpg

BreakBack

  • To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland BreakBack solution.
  • When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed
KvT_2600_0025.jpg
The BreakBack solution ensures that the cutting automatically returns to its original working position.
The BreakBack solution ensures that the cutting automatically returns to its original working position.
The BreakBack solution ensures that the cutting automatically returns to its original working position.
No need to stop - no time lost.
No need to stop - no time lost.
No need to stop - no time lost.