Kverneland 2836 M

Centre Mounted Disc Mower

The Kverneland 2836 M boast an extensive 11'8" (3.6m) working width at a weight of only 1709 lbs (775kg), which means the machine can be operated with tractors as low as 65 hp, making this a very attractive machine for farmers with smaller tractors, who still need to cut substantial areas. Paired with the Kverneland 2832 F front mounted machine the joint working width is an amazing 21' (6.4m.)

The Advantages:

  • Non-Stop Break-Away
  • 125° Vertical Transport Solution
  • Centre Suspension
  • 540/1000 Rpm Gearbox

Technical Specifications:

  Working Width No of Discs Weight Power Requirements
2836 M 11'8" (3.60m) 9 1709 lbs (775kg) 47/65 kW/hp
KV 2836 M 0003.jpg
Video
Animation
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M
Kverneland 2836 M


Cutterbar with Round Discs

  • Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
KvT_2600_0013.jpg
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
ProFit quick change of knives.
ProFit quick change of knives.
ProFit quick change of knives.

125° Vertical Transport Position

  • The mower is folded into a 125° vertical transport position using a hydraulic cylinder.
  • The low gravity point during transport, with the weight of the mower close to the tractor, provides an excellent weight distribution.
  • The tractor and mower remains well balanced, even during high speed road transport, and the machine is fixed during transport by the hydraulic lifting arm.
  • In addition transport height is limited, so passing through narrow gateways or under bridges is not a problem.
  • Another benefit is that the hydraulic cylinder also supports quick lifting of the mower from working to headland position.
KV 2828 M 001.jpg
Kverneland 2836 M set for transport.
Kverneland 2836 M set for transport.
Kverneland 2836 M set for transport.
Kverneland 3228 MT set for transport.
Kverneland 3228 MT set for transport.
Kverneland 3228 MT set for transport.

Adjustable Gearbox Speed

  • The machines also offer a large degree of operating adaptability, as they are factory fitted with the option of being operated with either 540 or 1000 rpm.
  • It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180°. 
KvT_3228_MN_0002.jpg

Centre Suspension

  • The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT, 3228 MT and  3132 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.
  • The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.
  • The benefit is less skid wear, optimum protection of the stubble and less fuel consupmtion.
KV 2836 M 0007.jpg
Centre Suspension
Centre Suspension
Centre Suspension
Centre Suspension
Kverneland 3132 MT
Kverneland 3132 MT
Kverneland 3132 MT

BreakBack

  • To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland BreakBack solution.
  • When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed
KvT_2600_0025.jpg
The BreakBack solution ensures that the cutting automatically returns to its original working position.
The BreakBack solution ensures that the cutting automatically returns to its original working position.
The BreakBack solution ensures that the cutting automatically returns to its original working position.
No need to stop - no time lost.
No need to stop - no time lost.
No need to stop - no time lost.